In the heart of the light
more than 30 UNIQUE OPTICS, internally developed, are the key to the success of our products.
An unmatched offer, directly from our experience ON WORLD’S ROADS.
A powerful instrument in your hands.
The optical solutions illustrated are only the most frequently used and representative of our offer.
In the lighting design process, our technical department benefits of a wider range of solutions, sometimes specifically created for a project’s requirements.
R series
3S – Industrial / Canopies / Tunnels
The 3S is one of our rotosymmetric optics, designed for low mounting height industrial and canopies applications. Sometimes used for tunnel lighting in cases of single centered line of lights.
6A – Parking lots
The 6A is an optics mainly used for parking lots lighting, featuring a medium/wide beam also behind the fixture. Suitable for light towers applications if installed in the center of the area to be lit.
8A – Street (junctions)
The 8A is an optics mainly used for narrow roads lighting such as motorway junctions ramps, narrow urban roads and cycle lanes. Unbeatable performance in case of poles with a long arm.
13S – Canopies / Industrial
The 13S is a versatile optics designed for the lighting of very high ceiling warehouses, aisles, toll station canopies and smaller objects like a business sign or a workstation, thanks to the concentrated light beam.
14A – Street
The 14A optics is the standard choice for streetlighting of the R family. It provides a very high uniformity level, low glare and works brilliantly also in low mounting heights.
16A2 – Pedestrian crossings
The 16A2 optics is our dedicated solution for pedestrian crossings lighting, designed to resolve the common visibility issues of traditional crosswalks with an unmatched level of vertical and horizontal illuminance. For additional information visit our website www.ledpedestriancrossing.com
18A – 19A – Street
18A and 19A are very performing optics in the streetlighting design, thanks to the improved luminance and longitudinal uniformity compared to the 14A. Maximum performance is achieved when the fixtures are installed with a short arm.
21S – Industrial
The 21S is used for industrial lighting at mounting heights greater than 8m. Provides an high illumination level on the visual task areas. Also suitable for warehouse shelving, highlighting the products on the shelves while illuminating well the floor.
27S – Industrial
The 27S is used for industrial lighting at mounting heights greater than 6m. Provides an higher illumination level on the visual task areas compared to the 3S. Also suitable for warehouse shelving, highlighting the products on the shelves while illuminating well the floor.
M series
15S – Industrial / Canopies / Tunnels
The 15S is one of our rotosymmetric optics for the M/MZ series, designed for low mounting height in industrial and canopies applications. Like the 3S, it can be used for tunnel lighting as well.
23A – Street / Parking lots
The 23A is a streetlighting optics for the Luxeon M series, developing a wide beam, thus sacrificing some ground illuminance. Works well at low mounting heights.
28S – Industrial / Canopies / Tunnels
The 28S is an optics used for industrial, canopies and tunnels lighting where an elongated pattern can improve the performance and efficiency.
29A – Tunnels / Light towers
The 29A optics is mainly used for tunnel entrances and light towers, featuring a concentrated beam, suitable to provide the high illuminance levels usually required from the typical applications.
31A – Street (junctions)
The 31A optics is the solution for narrow roads or long arms poles applications of the Luxeon MZ series, typically used for motorway junctions or where an high illuminance on the ground is required.
35A – Street
The 35A is the standard choice for streetlighting of the M/MZ series, flexible and suitable for a multitude of streetlighting scenarios. Improves the ground illuminance and efficiency of the 14A.
36A – Street / Parking lots
The 36A is the first optics to be developed for the TX series, covers streetlighting applications especially at low mounting heights. A very high efficiency level is achieved.
37A – Street
The 37A optics extends the streetlighting choice for the TX series to installations with standard mounting height lights.
40A – Street
The 40A is a streetlighting optics equivalent to 35A in terms of longitudinal performance, while improving the front beam making it suitable for lighting wider roads.